GATES 86049 Point to Zoom GATES 86049 Specifications Bend Radius (in) 3.25 Burst Pressure (PSI) 6000 Coupling Recommendation Permanent Power Steering Cover Color Black Cover Material Synthetic Rubber Developed Specifically to Resist Under Hood Environment (CSM) Dash Size 6 EN Standard N/A Hose Pressure Description Medium Pressure ISO Standard N/A Industrial Description 6PS188X25FT Inside Diameter (IN) .375 Length (Feet) 25 Material CSM - Type M Maximum Working Pressure (psi) 1500 Outside Diameter (IN) .71 Product Type PS188 Power Steering Hose Reinforcement Material Two High Strength Nylon Braids - Resist High Temperatures & Allows for System Noise Dampening SAE Standard J2050 Temperature Rating -40 Deg. F to +300 Deg. F (-40 Deg. C to +150 Deg. C) Tube Description Synthetic Rubber for Resistance to High Temperatures & Power Steering Fluid Type Fleet Application & Maintenance Hose PS188 Power Steering Hose Recommended for power steering pressure lines. Designed to meet requirements of SAE J2050 specifications. Temperature Range: -40 Deg F to +300 Deg F (-40 Deg C to +150 Deg C). Installation Tips Replace all power steering hoses at the same time, to prevent system contamination Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components Helpful Tools: Pulley Tool | Power Steering Bleeder Kit | Leak Detection Dye | Ultra Violet (UV) Light GATES Warranty Information: Limited Lifetime Warranty Details Recommended for power steering pressure lines. Designed to meet requirements of SAE J2050 specifications. Temperature Range: -40 Deg F to +300 Deg F (-40 Deg C to +150 Deg C). Installation Tips Replace all power steering hoses at the same time, to prevent system contamination Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components Helpful Tools: Pulley Tool | Power Steering Bleeder Kit | Leak Detection Dye | Ultra Violet (UV) Light